Problems and their solutions
Remember, if the tablet is under warranty, you should not solve the problem yourself; it is better to use a service center. If the warranty has expired or the service did not help, solve the problem yourself at your own peril and risk.
The list is compiled based on reviews, read “huawei mediapad 10 fhd 16gb 3g tablet reviews.”
- The tablet is defective or damaged (defects were noticed in the first batches)
Carefully inspect the tablet before purchasing for manufacturing defects, broken display pixels, cracks or scratches, and if there are any, ask for a replacement
Place it on charge and charge for several hours. If that doesn’t help, connect it to the charger while holding down the “Volume+” button. If the tablet does not turn on, take it to a service center.
- The tablet freezes when turned on on the welcome screen and does not respond to actions.
Press the "Power" button and wait until the tablet turns off. If the problem persists when you turn it on again, there is most likely a problem with the firmware. To solve it, you need to go to the official website of the developer https://www.huaweidevice.com/ru/, in the “Support” section, select “Downloads”. Find your model and download new firmware. All instructions for installing the firmware can be found in the archive. If it doesn't help, only the service will help.
How can I install a microSD card in HUAWEI P40 Lite?
Installing an SD card in HUAWEI P40 Lite is really easy. However, if you use two SIM cards at the same time, some phones have a shared space between the second SIM card and the SD card. Sometimes you will have 3 different slots with two SIM cards and an SD card.
Place your micro SD card on the Android laptop level
- Turn off HUAWEI P40 Lite
- Go to the compartment that contains the nano SIM or micro SIM and SD card. An opening tool can be used. You will need to press quite hard on the small hole next to the compartment opening.
- Place the SD card in the appropriate slot, following the shape if you want to insert it in the correct direction.
- Put the compartment back in place
- Turn on HUAWEI P40 Lite
How can I insert and rename an SD card in HUAWEI P40 Lite?
Generally, after installation, the SD card is automatically detected by your HUAWEI P40 Lite. An SD card can be used to store information, such as images, and as additional memory for installing applications. To rename an SD card, this manipulation is not possible and may damage the information on the card.
What are the different SIM card formats?
With the advent of different SIM card formats, users often have problems installing them. Now there are three formats that are used in devices.
Mini Sim is a format that was used initially on all phones and tablets. Now it can only be found on older devices. Also, sometimes budget tablets from Irbis, Digma and other inexpensive manufacturers are equipped with such a SIM card slot. The size of this type of SIM card is 25 x 11 mm.
Micro Sim is a format that was first used on Apple devices. For the first time, such a SIM card slot appeared on the iPhone 4. After some time, other manufacturers began to use micro sim. The card size is 15 x 12 mm.
Nano Sim is a modern format that has small dimensions of 12 x 5 mm. Almost all modern tablets come with just such a SIM card slot.
If you bought a Huawei tablet, but cannot insert a SIM card, change it at a specialized mobile operator store. The card can be changed to the desired size for free. It is important that the SIM card is registered in your name; you will need to present your passport.
Specifications and design
Specification:
- Display – 10.1 inches, resolution 1920×1200 (16:10), IPS
- OS – Android 4.0, modification – Ice Cream Sandwich
- Processor – 1.2 GHz, HiSilicon K3V2 (Cortex A9(quad))
- RAM – 2 GB
- Internal memory – 16 GB, support for SD memory cards 32 GB (SDHC) and SDXC (up to 64 GB, NTFS file system)
- Cameras – front 1.3 MP, rear 8 MP
- Wireless networks – Wi-fi, 3G, Bluetooth 3.0
- Navigation - GPS
- Battery – 6600 mAh lithium polymer battery (up to 8 hours at medium brightness and without network)
- Additionally: built-in speaker, built-in microphone, headphone or microphone jack, LED flash, accelerometer, gravity module, USB-host keyboard as one of the options.
Specifications
There is little information about the processor with which the tablet was released, it is known that it is 4-core, is Huawei’s own development based on the Cortex A9 architecture, clock frequency 1.2/1.5 GHz, and according to the developers, it is even slightly ahead of its main competitor Tegra 3 in performance . The tablet is one of the few with 2 GB of RAM, which will allow tablet applications with any resource requirements to run without lag. The internal memory on the tablet is 16 GB with support for memory cards up to 32 GB (SDHC) and SDXC cards up to 64 GB. A keyboard dock can be purchased as an additional option.
The tablet supports Wi-fi and Bluetooth wireless networks. The presence of a built-in 3G modem is determined by the buyer. Navigation is carried out by the American GPS system. Video formats: MPEG-4, WMV-9, H.264, VC-1, MP4, RM, 3GP, 3G2, RMVB, MOV, ASF. Supported audio: FLAC, MP3, WMA, APE, OGG, WAV, RA. Text: XLS, TXT, PPT, DOC, FB2. If you are interested in the tablet, but have doubts, then you should type in a search engine “Huawei Media Pad 10 tablet reviews” and read reviews from users.
Design and decoration
The 10-inch tablet comes in one color option – white. The design is elegant and not flashy. The 10.1-inch display is surrounded by a black frame without touch buttons and framed by a white body. Above the display is a front 1.3 MP camera. The tablet is well protected from mechanical damage, due to the fact that almost the entire back of the tablet is covered by an aluminum case with a white plastic insert in the rear camera area. This matte insert is one of the disadvantages of the tablet - it gets easily soiled (after a short use the tablet looks untidy).
Front view
The dimensions of the tablet are 257.4×175.9 mm. At the same time, it is ultra thin (only 8.8 mm) and, which is important for operation, the lightest among its competitors (580 g). The assembly of the Huawei mediapad 10 fhd 3g tablet is of high quality, there are no backlashes or creaks when used, and the back aluminum cover is not deformed.
Back view
1st layout of elements
2nd layout of elements
Schematic arrangement of tablet elements
- Built-in microphone
- Memory card slot
- Light sensor
- Front camera 1.3 MP
- Power button
- Volume control
- Wi-fi/Bluetooth antenna
- Rear camera 8.0 MP
- Flash
- GPS antenna
- Headphone or microphone jack
- Stereo speakers
- Multifunction port
- Keyboard connectors
Memory card requirements
You need to keep in mind that the memory card must be at least class 10 . Otherwise, even correctly performed actions may not lead to success. It is very likely that the memory card itself may be faulty.
Example of a Class 10 memory card
It is better to transfer applications to a new card. The old one may not work correctly after connecting it as an internal drive.
What types of SIM cards are suitable for the tablet?
To properly remove the SIM card tray, you need to find out what type of SIM card your device supports. Today there are 4 types:
They differ from each other only in size. If a regular SIM card has the largest size of the existing cards, then the Nano stands out as the smallest and is mainly used in modern phones. And the most common for tablet devices is Micro.
How to setup
Many questions concern how to activate a memory card in an Honor phone. In most cases, this process occurs automatically. If this does not happen, the product must be formatted. To do this, do the following:
- Enter Settings, and then go to the Memory section.
- Go to Memory Card.
- Select Format, and then Clear and Format.
- Wait for the process to complete and click Finish.
If you cannot set up the memory card in your Honor phone, you may need to format it via a card reader and PC/laptop. In this case, the drive must be removed from the connector, installed in the card reader and inserted into the USB connector. After identifying the flash drive, just click on the right mouse button and select the Format section.
How to insert a memory card into a Huawei tablet
The instructions for tablets are not much different:
- open the slot;
- enter SD/microSD;
- close;
- reboot the gadget.
When you turn on your smartphone or tablet, there will be a notification in the status bar that new media has been found in the device. Using the functions of this window you can make settings. For example, set the path to save downloaded files or transfer applications from internal storage there. It is also now possible to view information about both internal and external drives in Explorer.
This instruction will be useful not only for owners of Huawei and Honor, but also for other owners of phones with Android OS. If for some reason your phone or tablet does not see the new media, then try inserting it into another device. If it reads, then you should look for a breakdown in your device. If it reads, then change the drive, as this one is damaged.
How to get a card
Smartphone owners should understand how to properly remove a memory card from an Honor phone. It is important to follow special instructions here to avoid losing data from the drive. The action algorithm is as follows:
- Go to Settings and Memory, and then Memory Card.
- Click on the Extract button.
- Wait for a notification that the drive can be removed.
- Turn off your phone.
- Remove the tray according to the scheme discussed above using a special pin.
By knowing how to remove a memory card from an Honor phone and following these instructions, you can avoid hardware failures or loss of important data. In the future, you can easily install the product in the same tray and be sure of correct recognition by your smartphone.
