Why does Honor and Huawei phone run out quickly: reasons, what to do?

In this article, we will look at the reasons why your Huawei phone discharges quickly and does not hold a charge. You can do some things yourself and increase the battery life of your phone without recharging. Some reasons for the battery to drain quickly will require professional assistance from a service center.

Typically, the cause of this problem is the battery. But it is quite possible that the problem is in the system and programs, because applications can require a lot of energy.

The main reasons why Huawei discharges quickly

We are often contacted in the following situations:

• The battery is exhausted. Over time, it loses capacity, which affects the overall performance of the device. The smartphone charges and discharges quickly. It is also possible that it does not charge completely, but up to 70-80-99%. In this case, the battery will need to be replaced. But this version still needs to be confirmed by diagnostics. And purchasing and replacing a new battery is not a problem.
• The battery has visible deformations (swollen, oxidized). In this situation, it will need to be replaced. This happens after prolonged use of the phone or as a result of moisture getting under the case.
• Incorrect firmware version, which unnecessarily consumes energy and distributes it incorrectly between modules. You should read about this on the specialized forums of your phone model.
• Incorrect setup and use of the device. The smartphone does not hold a charge well when you set the display brightness to maximum. It must be optimal. Long-term use of applications also plays a role. Settings for your desktop, notifications, and everything else should always take energy savings into account. Otherwise, the device will discharge and reduce battery capacity very quickly.

The battery also suffers for various reasons (other than its natural aging). The use of low-quality chargers, mechanical damage and water ingress - all this can negatively affect the overall operation of the device. That is why this issue should only be dealt with by an experienced mobile equipment repair technician.

Contact our workshop

If you do not have enough charge for your Huawei, contact our service center. Diagnostics will take only 5-10 minutes and will be performed free of charge. Then the master will name the cost of the necessary work and perform it. Our main advantages:

• Huawei spare parts are always in stock;
• Low prices for repair work and parts;
• Guarantee for all services;
• Accurate work in laboratory conditions with professional equipment.

Does Huawei discharge quickly? We will help you faster than it runs out completely!

Mobile phones have easily won the competition over their landline counterparts, due to the lack of connection to a specific place of use. And the main role in ensuring the mobility of such devices is played by the battery. The battery capacity of a mobile phone is indicated in mAh. That is, the higher this indicator, the longer the mobile phone can work without recharging. The problem is that this time can be shortened due to other factors. For example, now on the Internet you can find complaints that the battery on Huawei and Honor runs out too quickly.

We tried to understand this problem and collected as much information as possible to answer the question - what to do if the battery on Huawei and Honor smartphones runs out very quickly?

What to do if your Huawei or Honor phone runs out quickly?

Rapid discharge creates a number of negative phenomena:

• the battery wears out quickly;
• The phone's performance lasts for less time;
• overheating occurs;
• you will have to overpay for repairs or replacement of parts.

To avoid creating discomfort for yourself, follow simple rules.

Removing unnecessary programs

If you have software that you use very rarely, or don’t run at all, remove it. Clean up your RAM and allow faster performance.

Airplane mode

Many people forget about this profile, but it is very useful. After turning it on, many network and background processes are blocked, so the battery is practically not discharged.

Turn off information transfer and GPS

If you don't go online and don't need a navigator, turn off these processes. The background work of different systems is invisible to the human eye, but this does not mean that it does not exist. During blocking, the phone still searches for the network and connects to the nearest towers. A simple example is riding a train. If you do not turn off your mobile data, then after just a few stops you will find a warm or even hot device. This is due to the fact that you travel tens of kilometers and change mobile coverage cells. When leaving one zone, a connection occurs with the radio module of the next one.

Energy saving function

The energy saving function is a very useful thing, which for some reason is neglected by many owners of modern technology. Its essence is simple, and the result of the work is obvious. When the energy saving mode is active, a number of unnecessary background processes are blocked, the screen becomes less bright, and vibration is weakened.

Removing live wallpapers

Live wallpapers drain your phone, and this is not a myth. Playing an animation requires a little more energy than displaying a static image. That’s why we recommend installing a beautiful photo instead of a video or GIF. By the way, live wallpapers also slow down the operation of the operating system. On devices with more than 4 GB of RAM, this is not very noticeable. But on older models with 1-2GB of RAM, difficulties will arise.

Enable dark screen background

Dark background is a special tool that creates darkness. The modern type of display is AMOLED. The peculiarity is that dark colors are its natural state, and the pixels do not have to perform additional work to display black colors to you. But if you put a white splash screen, then the pixels will have to be activated and display the requested parameters to you. Although this is not significant, it also harms the battery.

Display off time

Modern smartphones have many hidden features that few people know about. These features make everyday use much easier. One of these is turning off the display. That is, you set the time, for example, 1 minute. If the screen is unlocked but you have been inactive for a minute, it will automatically lock. The following time intervals are suggested in the settings:

• 5 second;
• 30 seconds;
• minute;
• 5 minutes;
• 10 minutes;
• 30 minutes.

5 seconds is not enough. You will be inconvenienced because the screen will constantly fade out. Optimally - from 30 seconds to five minutes. If you plan to read a book, choose 10-30 minutes.

How to transfer data from iPhone to Honor and Huawei completely: instructions

Turn off the vibration alert

Among several sound profiles, vibration is most often used - this is when the auditory component is turned off, but the signal is sent in the form of vibration. This strains special modules that are responsible for its reproduction and strength. If you want to switch vibration mode to economical mode, then in the sound profile settings, set the power parameter to “Weak” or “Medium”.

The smartphone must be cool

Every second phone owner has experienced that their device has overheated. This happens during recharging, long calls, or after using programs that are heavy on the operating system. This heats up the lithium, the main component of the battery. This is harmful because under the influence of high temperatures it loses its properties. Advice - do not leave the gadget in direct sunlight, artificial light, or incandescent lamps.

The battery charge should be between 30%-90%

Surely you have noticed that the phone discharges most quickly in the period from one hundred to ninety percent, and from thirty to zero. This is not just like that, because this is the so-called “risk zone”. The normal operating period is 30%-90%. Maintain this range.

Factory settings

If you begin to notice that a lot of unnecessary software has appeared, advertisements pop up all the time, and at the same time your phone quickly dies, then you have a virus. An antivirus often helps eliminate it. But if it has been on the device for a long time, then only resetting it to factory settings will help. This is an extreme solution to the problem, which you should resort to if other tips have not helped. A reset is performed according to the instructions, which should be strictly studied before execution:

• charge the device to at least 60%;
• remove the flash drive;
• synchronize or copy all information from external media to the cloud;
• open settings;
• scroll down;
• click on the item “Restore and reset”;
• agree to the terms;
• confirm actions;
• wait for the operation to complete.

We emphasize that it is forbidden to try to interrupt the reset process. This will cause the phone to stop showing signs of “life”.

We calibrate the battery according to Google's advice

First, make sure that there are no bulges or obvious defects on the battery. If there are such problems, then take it out and throw it away. It can no longer be used. If there is no damage, then follow the instructions:

• Discharge the battery until the phone turns off by itself;
• try to turn it on;
• do this several times until the device starts;
• connect the charger;
• wait until “100%” appears on the screen;
• reboot.

We use only original charger

This is a very important point that is worth listening to. Non-original charger has the greatest impact on your equipment. This is due to the fact that the original power does not correspond to the declared one.

Recommendations from official representatives of the manufacturer

I am glad that the company that is engaged in the development and further production of these very popular mobile phones today has a fairly active and responsive support service.

For example, one of the users posted a message in their official group with the following question:

Hello. I purchased Honor 20 a few weeks ago. I constantly monitor the remaining time in the company’s battery manager. And I noticed one unpleasant thing for myself - in comparison with the initial measurements and with the same charge level, the number of hours was almost halved! And this despite the fact that I specifically double-checked the applications loaded in the background - they are completely identical. What could be the reason for this apparent discrepancy?

The person received a response very quickly. First, representatives of the technical service said that the battery life of a smartphone can be reduced for a variety of reasons. The following were cited as the main ones:

• Environmental influence;
• Settings that are set by the smartphone owner individually;
• Operating mode;
• Active use of energy-intensive software;
• Constantly searching the Internet and using Wi-Fi.

That is, everything is quite vague. And it’s not entirely clear what to do if the battery runs out quickly. Fortunately, the answer did not end with this information - technical support gave a number of recommendations that should help save the battery power used on the smartphone. These recommendations consist of four points:

1. Through “Settings” and “Security and Privacy” go to “Location Data”. Select “Advanced settings” and deactivate the function responsible for searching for Wi-Fi networks.

2. Return to Settings. Select "Battery". Go to “Launch Applications”. Deactivate automatic control. Use the drop-down menu in the upper right corner to select manual control. The “Work in the background” subsection will appear. View list. Uncheck those applications that should not function in sleep mode. Also look at the “Auto-launch” and “Indirect launch” columns. This should be done carefully, as the functioning of some programs plays an important role. Plus, disabling them may make it impossible to receive the necessary notifications.
3. Go again to the section responsible for settings for the battery. Carry out an optimization procedure in it - act on the basis of the advice received. And also set the energy saving mode.
4. Without leaving the previous section, go to “Other settings...”. Pay attention to the item called “Connect to the network when the device is in sleep mode.” Deactivate it.

How to increase tablet battery life?

If the tablet does not hold the battery charge well while playing games or watching videos, you can use the instructions below:

• The first step is to open the gadget settings control panel. To do this, you need to swipe down on the display. Next, use the slider to reduce the screen brightness.
• Then you need to go to the display of applications that were recently used, but remained running in the background. They need to be closed.

• In order to reduce power consumption, you need to change the add-on settings. You need to turn off the high volume, high HD resolution, and turn off GPS options.

In order to extend the battery life, you can use the following instructions:

• It is necessary to promptly close applications used in the background. To do this, you need to go to the screen of add-ons that were used previously. Next, click on the icon to remove all unused add-ons.
• The next step is to turn off notifications for some add-ons, while leaving only those that are used. To do this, go to the “Settings” menu. Then select “Notification Center”. Next is “Group Notification”.

• Maximum brightness and high-frequency resolution of the display also affect battery consumption. To reduce battery consumption, you need to enter the “Settings” menu. Next, select “Screen and Brightness”. Then you need to activate the “Auto” and “Smart Resolution” options.
• You can also reduce battery consumption using the “Energy Saving Mode” option. There are two power consumption modes in tablets - “Power Saving Mode” and “Ultra”. The user can choose the mode that suits him.

What else can you try?

As practice shows, an accelerated decrease in the charge level of a telephone battery is only a consequence. Which means there is some reason. And if you find it, then perhaps you can solve the problem itself.

For example, a smartphone is constantly searching for a network. The reason may be that the person’s location is inconvenient for receiving a signal. Or poor quality of services provided by the operator. Or – the distance to the nearest mobile tower is too great. Yes, some of these reasons are quite difficult to solve. For example, it is not always possible to just pick up and move to live closer to the tower. But leave the phone in a more suitable place. Or try to seek services from another operator - this is quite possible.

Also, the charge is consumed faster not only when searching for various networks, but also when actively using them. And it’s clear when there is a direct need for this. But often a person can use one or another function. And then forget to deactivate the functionality, which later turned out to be unnecessary. But it continues to function. Therefore, it is recommended to always check for the active state: Wi-Fi, Bluetooth, GPS, 3G/4G. Not using it at the moment? Just turn it off. After all, it will take a maximum of a couple of seconds. But it will really extend the battery life of your smartphone.

Another interesting nuance is that some mobile phone owners, for unknown reasons, believe that if they put their smartphone into the so-called sleep mode, then all programs that were previously running until that moment automatically stopped functioning. But that's not true! Applications don't stop this way! They continue to perform some operations, while consuming energy, reducing the overall battery charge level. Therefore, before leaving your mobile phone alone, make sure that all unnecessary software is guaranteed to be closed.

By the way, if you visit the “Battery” section in the settings of your mobile phone, you can find one extremely useful tool there, which is called “battery usage”. It is enough to use it to understand where and when exactly the battery power is consumed. And based on this, adjust the mode of use of the mobile device.

Energy-consuming functionality

It is known that the screen consumes a lot of device power. Other active energy consumers include the following functions:

• GPS;
• desktop wallpaper with animation;
• NFC;
• bluetooth;
• Mobile Internet;
• wifi

And if all these functions are turned on at the same time, then you shouldn’t even count on slow energy consumption. To save energy, experts recommend disabling those functions that the user is not currently using.

Optimizing energy supply for Honor smartphones - recommendations

There are also a number of general tips recommended for use on mobile phones manufactured under the name Honor. In some situations they can give the desired effect:

Restarting the device

It is only recommended not to simply start the procedure for restarting the smartphone, but to initially disable it. Wait thirty seconds. And activate the gadget again. If you use your phone for a long time, too many running processes may accumulate in the background. And this method will allow you to quickly get rid of them.

Entering Safe Mode

Many users know how to remove applications from memory. But sometimes doubts arise in favor of choosing one or another option. What if after such procedures something stops working altogether?

To solve this problem, it will be useful to temporarily launch the so-called safe mode. It will function only those programs and processes that are required to support full functionality. That is, it will be possible to view them and remember them. And then, after returning the smartphone to its normal state, use the information obtained in this way.

Safe mode starts like this:

• Use the ON button and hold it down for a few seconds;
• A menu will appear on the screen where you can choose what to do next (reboot, shutdown, and so on);
• You need to hold your finger on the reboot icon for a long time;
• An additional window will appear asking you to restart in the mode we need. Take advantage of it.

Return to default settings

It is quite possible that the owner of the gadget, while customizing the phone for himself, changed something in the parameters in such a way that this led to a problem with rapid discharge. Therefore, it is possible to return them to their original state. This is done as follows:

• Go through Settings to the “System” item;
• Select from the available options “Backup and Restore”;
• First, click on create a backup copy of your data, then click on restore.

Clearing cache

Yes, a cache that is full and has not been cleared for a long time can also lead to deterioration in the performance of a mobile device. Including the rate of battery discharge.

Image quality

Huawei P10 takes pictures at the level of its predecessors - Mate 9 and Mate 9 Pro. The colors are bright, but at the same time realistic and as close as possible to natural shooting conditions. The smartphone does not raise colors unless you increase the color in the camera settings yourself.

The image detail is high, textures are conveyed accurately and clearly. However, color photographs taken at a resolution of 20 megapixels are inferior in detail to black and white photographs taken at the same maximum resolution.

Color photographs taken at 12 megapixel resolution are perfectly detailed, with little noise, correct color rendition, and sufficient sharpness. The 12MP camera at default settings produces some of the highest quality images we've encountered.

20MP hybrid photos don't have the same detail we see in photos taken with a 20MP monochrome sensor. But still, color photos at maximum resolution look good.

The black and white shooting mode in the Huawei P10 surprises with the quality of detail and clarity, high contrast and low noise. However, according to GSMArena experts, this mode will not become popular among users, at least among the majority who are not interested in shooting at a professional level.

12MP color shooting - 20MP color shooting - 20MP black and white shooting

Huawei P10 also offers new photo scaling capabilities (zoom). Getting as close as possible without losing quality is possible by capturing multiple frames at once, unlike other smartphone cameras that only take one photo.

Computer (software) enlargement and scaling of the image led to a worse result than a twofold zoom in with the native zoom during shooting.

The quality of the image does not deteriorate, both with 2x and 3x zoom - detail remains at the same level (normal mode - 2x zoom - 3x zoom):

Recommendations for reducing power consumption on Huawei phones

There are universal tips that are suitable specifically for Huawei phones. And they should also be carefully studied if saving your smartphone’s battery power is important.

So, initially it is recommended to go through the settings to the “battery” section. Next, proceed as follows:

• Pay attention to the top of the activated section. There is an energy saving mode. If you use it, you can extend the battery life of the device by about an hour and a half. In this mode, the system reduces the screen brightness, some applications are closed in the background, and the processor operating frequency is reduced;

• Just below is another interesting mode – Ultra. In fact, it turns the modern smartphone into a kind of analogue of the first mobile phones. That is, using this mode you can only make calls, answer calls, send or receive messages, and use the contact book. All. What in return? The battery charge will last several times longer. For example, in normal mode the existing level lasted for eight hours. In "Ultra" - several days. The difference is quite significant. This option is worth choosing if a person is going to go somewhere, for example, for a few days in the mountains, where there is no possibility of recharging. And constant communication is needed;
• Now look at the bottom of the section and select “optimize”. The system will analyze the capabilities and status of the phone. It will offer several options that can be used to obtain the desired result;
• It will also be useful to go into “screen resolution”. In it you can find a special tool called “Smart Solution”. If you activate it, the mobile system will independently select the optimal display brightness, which will reduce the rate of battery charge consumption;
• Just below is another additional menu “Launch”. Here you can set manual or automatic control of the launch and operation of various applications. For example, sometimes one program automatically launches several at once. But it is not a fact that they are used. And energy is wasted on keeping them in working mode;
• Well, the last tool in this section is the gear-shaped icon located in the upper right corner of the screen. The available functionality allows you to configure the ability to transfer data in different ways when the phone is in sleep mode. And also analyze energy-intensive applications.

Dynamic range

The photographic capabilities of the Huawei P20 Pro smartphone are significantly improved not only thanks to a powerful zoom, but also to Light Fusion technology, which combines four physical pixels into one large one. That is, it allows you to shoot with a resolution of 10 megapixels instead of 40 megapixels and get a noticeably wider dynamic range. This function of the device is useful both during the day and at night.

In bright sunlight, the camera can handle both highlights and shadows in many situations.

Automation coped with the contrasting plot

However, sometimes the automation selects an exposure that makes the shadows too dark. In such a situation, it is enough to touch the screen to indicate for measurement an area with medium or slightly darker tones, after which they become lighter, while the light ones retain details. The effect is similar to the HDR function.

Automation failed to cope with contrasting scenes Result of manual exposure metering

When it is important to preserve details in both light and dark areas - and you don’t want to deal with manual correction - you should turn on HDR.

More about Huawei: Huawei Huawei Switch S5700 series S5700-52X-PWR-LI-AC | Official website of Huawei in Russia

HDR disabled HDR enabled

Reviews

At the end, we suggest that you read the reviews to understand how ordinary people dealt with this problem:

1. Andrey. I bought Honor 10 a long time ago. Advice from technical support really helps. The fact is that I often travel by train for work. And it is not always possible to charge a mobile phone. And using the power supply mode, you can last an additional several hours, which is often very important.
2. Oleg. I liked the Ultra mode in my Huawei P20 Lite. I am a lover of active recreation, and often go somewhere in the mountains, forests, or lakes for several days with friends. And they wonder why nothing works for them anymore, and I’m connected all the time. You just need to turn off everything unnecessary. And you can not worry about the battery charge at all for three or four days.
3. Marina. Thanks for the tip with safe mode. Indeed, sometimes too many applications accumulate in the memory of my Honor 8x. I didn’t know which ones to turn off. As a result, the performance of the smartphone really dropped and the battery ran out faster. Now I know what I can get rid of and what I can’t.
4. Vladimir. My wife and I have Honor 9 lite. We bought them in the same salon at the same time. But mine holds a charge for several hours longer. She is surprised. And I just remember to turn off Wi-Fi, Bluetooth and everything unnecessary when I’m not using it. I open the curtain on her smartphone - almost everything is active! Here is the result.
5. Semyon. When I see a low charge level on my Huawei P30 Pro, I instantly switch it to a special energy-saving mode. Its peculiarity is that the system performs all the necessary operations independently. Of course, you can implement them yourself, but you will have to waste a lot of time. Why, if the necessary and very effective functionality already exists?

Huawei produces wonderful phones - stylish, memorable, functional. Honor 8X, for example, has a battery capacity of 4000 mAh. And how annoying it is when, with such a powerful battery, the charge barely lasts for a day. However, battery consumption largely depends on the user himself, or rather, on how he “loads” his smartphone.

Reasons why the camera takes bad pictures

Before proceeding directly to setting up the camera, you should figure out whether this is the reason for the deterioration in the quality of the pictures. The fact is that, like other elements in the phone, the camera can be damaged due to mechanical impact, or stop working due to software problems.

Among the most common factors leading to deterioration in photo quality are the following:

• Incorrect use of the camera. In most cases, this concerns shooting while moving or attempts to capture moving objects in a photo. To solve the problem, just stop moving, hold the phone confidently and avoid shaking.
• System failure. Despite the high level of quality of modern software, it is not protected from bugs and glitches. The camera may not work well due to a simple system failure. If this happens, it will be enough to reboot the device or return to factory settings.

• Problems with updates. In some cases, errors may be related to recent updates. If the camera began to take poor pictures precisely after installing a new version of the system, you should roll back the changes.
• Mechanical damage. Also a common reason (may even apply to new devices). In this case, two main types of problems can be distinguished. The first is due to moisture or dust getting into the phone. In this case, the physical substance will interfere with the creation of the photo. Another type of problem is mechanical damage. As a rule, we are talking about minor scratches, although there may be more serious problems if the phone, for example, was dropped.

It is necessary to proceed to changing camera settings only if the factors described above are absent. In this case, the problem really lies in the settings.

Solution #1: Reboot

At times, simply rebooting your device can be the answer to fixing your battery drain problem. If you do not quite understand what we are talking about, let us explain: in this case, by reboot we mean simply restarting the device. That is, you need to turn off and then turn on your Honor again for 30 seconds.

An alternative to simply turning it on/off is to hard reboot your phone. This is when two physical buttons are pressed at once - the volume down button and the power button. They need to be held down for about 10 seconds until the phone starts to reboot. This is an effective method, but it does not always help. If the problem with the battery is still relevant, you need to use another solution.

Solution #2: Put your device in safe mode

So, maybe the user is not aware that his Honor smartphone is constantly running applications (in the background), or performing system tasks that consume a lot of energy. To check if this is the case, you need to reboot the device into safe mode. This mode only runs applications that are part of the stock version of the phone's operating system. No third-party programs are running, and you can be sure that they are not draining your battery.

To put Honor into safe mode, press and hold the power button for a few seconds. A virtual reboot button will appear on the screen; you need to press and hold it with a long tap until a window pops up asking you to reboot into safe mode. Tap on this window to start rebooting. After it is completed, check how your Honor is working and how the battery holds a charge.

How can you improve the quality of your photos?

The key to success in this case lies in the correct settings. However, it is also important to pay attention to additional nuances that affect the quality of the photo. Recommended:

• If possible, always use a tripod. For a high-quality photo, the phone should not move while shooting. This is difficult to do without a tripod. This tool will be especially useful when it comes to “Portrait” or “Night” mode.

• Avoid zooming (enlarging the image). The fact is that zoom always spoils the quality of the photo; it becomes blurry and unclear. In addition, at high magnification, hand twitching becomes especially noticeable. Although modern devices can use artificial intelligence to eliminate these shortcomings, it does not always save the situation.
• Monitor the proportions of shadow and light. Modern smartphones make automatic adjustments, but despite this, the dominant role in this regard is given to humans.
• When creating black and white photographs, use a monochrome lens, it has a positive effect on the final result in this shooting mode.

• Experiment with focus, don't rely on the automatic system. An automatic system will often set this up well, but manual focus may be more effective.

More about Huawei: Repair of HUAWEI phones in Moscow with addresses, reviews and photos -

These are the main recommendations. You should also remember to care for the camera, wipe it from time to time and prevent dust or moisture from getting inside.

Solution #3: Restore default settings

If your phone runs out of battery quickly, you can restore the system to its default settings. Be careful and follow the instructions below:

1. First, press and hold the Power button for a few seconds.
2. Now open the Settings app on your Honor phone.
3. Tap on the “System” section.
4. Select "Backup and Restore".
5. In the menu that opens, select “Backup”, confirm the action by tapping “Restore” again.

The phone should automatically reboot. This method of solving the problem may also not work. Then we suggest you use another solution.

Incorrect cellular communication

Some users note that if you spend a long time in places where the cellular signal is unstable, for example, outside the city, the battery drains faster than usual. This happens because the Huawei smartphone will spend more energy searching for and restoring a good cellular signal.

The battery will drain faster, even if only one of the two SIM cards has a similar problem. If during this period it is important to preserve the charge as much as possible, then it is recommended to disable this SIM card for a while.

Share link:

Partner news and advertising

Solution #4: Clear cache on Huawei Honor phone

Clearing the cache, that is, that part of the smartphone’s memory in which files used by the system to perform repetitive tasks and processes are usually stored. Over time, the cache can become full of these “residual” files, slowing down the device and negatively affecting battery life. To clear the cache, do the following:

1. Turn off your Honor completely.
2. Turn it back on by pressing the power button and volume up button at the same time. They need to be held for several seconds.
3. The phone will reboot and the Recovery Mode menu will appear on the screen.
4. Now use the volume down button to navigate to Wipe Cache Partition. Confirm your choice by pressing the Power button.
5. The cleaning process will begin. Once completed, reboot Honor into normal operating mode.

As a rule, after clearing the cache, the battery holds a charge much better. But there is one more, final solution to the problem. Let's talk about him too.

Solution #5: Restore factory settings

Performing this operation will effectively clear the system cache. To restore factory settings you need:

1. Open the Settings menu.
2. Select the “System” section.
3. In this menu, find the “Reset” item.
4. Tap on the item “Restore factory settings” and confirm the selected action by tapping on the line “Reset phone settings”.

When you roll back the system to factory settings, user information will be lost, so it is recommended to first back up and save all valuable data (contacts, SMS, media files, etc.) on an external storage device.

Of course, there are other ways you can try to improve battery performance. They are more radical and should be used in extreme cases. This means flashing the phone to a newer software version. Here you also need to make a backup copy first so as not to lose valuable files. Usually after updating the battery problem goes away.

«>

Setting up the main camera

It is impossible to describe what needs to be configured and how. The fact is that every phone is unique, just like the camera on it. In addition, specific settings depend on what exactly the user is photographing, from what distance and when (meaning time of day).

Unlike Apple phones, which practice automatic configuration for most options, the following settings are available to the owner of Android smartphones:

• zoom in and out of the image;
• selection of modes, from bright to faded;
• enable or disable Live Photo mode;
• additional settings responsible for resolution, photo format, maximum weight and processing.

It is recommended to experiment to select the optimal parameters. Particular attention should be paid to the “Night” mode.

It allows you to take high-quality photographs at night. If desired, the user can adjust certain parameters of this mode. You shouldn’t be afraid; if the settings spoil the quality of the photo, you can always reset them to factory settings.