Why the speaker does not work on Huawei and Honor: reasons, how to set it up?

Reasons for no sound on Honor phones

The reasons for the lack of sound on Honor can be of both software and hardware nature. And sometimes it is quite difficult to immediately determine what exactly is the culprit of the dysfunction.

Typically, the most common causes of sound loss include the following:

• Honor's phone is experiencing random malfunctions;
• The sound is accidentally turned off by the user (in the settings or the Do Not Disturb mode is activated);
• External headphones are connected to the phone, or due to a clogged audio jack or system failure, the phone thinks that the disconnected headphones are still connected;
• The sound problem is caused by an application. The most common reasons are the audio player, equalizer and other relevant software; One of the reasons for the problem is the audio player on your phone
• The audio speaker of the phone is physically damaged (out of order);
• Poor quality smartphone firmware (usually custom);
• Phone hardware failure (water got in, etc.).

Where to get ringtones for iPhone

But in fact, the problem lies in the fact that Apple itself offers essentially only one way to replace standard sounds - purchasing the latter from the iTunes Store. The price for most ringtones in the Russian store is 22 rubles, and in the Ukrainian store it is 7 $, which is already quite expensive for a track in AAC format 30 s long.

Of course, there are other, more intricate, but free ways, using the iTunes application on Windows and Mac, as well as GarageBand on the iPhone itself. They have one common drawback - the output we get is a ringtone no more than 40 seconds long via iTunes and no more than 30 seconds long using GarageBand. I needed to find a way to eliminate this drawback and make the melody a little more than a minute long, and this method was found.

On Mac there is another solution - you can make a partial copy of the iPhone and create a ringtone in one application.

Force restart your phone

A forced reboot of your phone can help restore sound on Honor. Instead of a traditional reboot, perform a forced reboot by holding the power button for 10-15 seconds

. After the system reboots, check the sound on your smartphone.

Rebooting Honor with external headphones connected to the audio jack may also help. Sometimes the smartphone does not correctly perceive the disconnection of the headphones, and continues to consider the disconnected headphones as connected and send sound to them. In this case, we recommend turning off the phone, connecting headphones to them via a 3.5 jack, and then, when the phone boots up, disconnecting them.

How to add a ringtone to iTunes 12.7

After the release of the new version of iTunes 12.7, a myth appeared on the Internet that it is now impossible to add your own ringtones to the library of this program, you can only buy them. We decided to check and dispel it. We will add a ringtone to iTunes. The fact is that previously in the iTunes 12 library there was an Edit menu button, with which you could enable the Sounds section, in iTunes 12.7 we tried to click File - Add to Library, then we selected a ready-made ringtone in M4r format and clicked OK, but the ringtone It never showed up in iTunes. Although this method of adding worked before version 12.7. It turned out that in the new version of iTunes, a ringtone can only be added by dragging and dropping. To do this, pump up the iPhone and wait for it to appear in iTunes.

• As soon as the iPhone appeared in iTunes 12.7, grab a ringtone with the m4r extension from the desktop (or better yet, in a specially designated folder) and drag it into the iPhone (see the Devices section).
• The second option is to click on the iPhone icon in the iTunes program, and here, in the On my device subsection, drag and drop the finished ringtone.
• Well, as per tradition, guest column, thank you Risha for another way.

If you decide to remove a ringtone from an iPhone using iTunes 12.7, you will need to follow these steps.

Having learned how to add ringtones to the new iTunes 12.7, you can use the full instructions for creating a ringtone and downloading it as an iPhone ringtone - Instructions for ringtones in iPhone.

Source

Close the problematic application and check the sound again

If your Honor phone has no sound only when using one specific application, then the problem may be due to a bug in that application. Try deleting the cache of this application, and then check the operation of the program.

To do this you will need to do the following:

1. Go to your Honor's settings;
2. There, open Application Manager;
3. Select the appropriate application and tap on it;
4. After entering its settings, click on “Memory”;
5. After entering its settings, click on “Clear cache”.

If nothing happens after clearing the cache, delete the app's data. This will refresh the application as its settings will be returned to their starting state.

The last step in this case would be to reinstall the application. Remove the application from your phone as usual. Reboot your gadget, and then reinstall this application from the digital store.

Why the ringer speaker does not work on Huawei and Honor

The main reasons are considered to be the following:

1. The audio settings are incorrectly configured.
2. The user has activated silent mode.
3. There is a software conflict in the system.
4. The speaker is clogged.
5. Moisture has entered.
6. Broken headphone jack.
7. Mechanical damage.

In fact, it does not matter at what moment the malfunction appears; in any case, the cause will have to be identified.

Regulator failure

The regulator is responsible for changing the volume. If you set the minimum value and the part breaks, there will be no sound. The way out of the situation is to repair the regulator. To do this, you need to disassemble the smartphone, check the contacts and, if necessary, replace the module. In some situations, it is enough to solder the contacts. You are unlikely to cope with the task on your own; if you lack experience, contact a service center where diagnostics and appropriate repairs will be carried out.

Why is my Huawei/Honor phone not charging: reasons, what to do?

virtual expert

If you have any questions, it is better to contact a virtual expert. This is a special bot that will provide assistance in solving common problems. In addition, he can act as an interlocutor and simply maintain a conversation. Try it yourself - write to the robot, he will answer instantly.

Checking settings

The next reason may be hidden in the settings. Or rather, in incorrectly set parameters.

Changing the volume in the settings menu

One solution is to return the default audio settings. To do this, go to options and go to the volume section. Please note that the name of the tab may vary for different smartphones. You should open the option where there will be a list of all the sound profiles, including volume control and stereo speaker activation. Raise the volume to maximum near all items and check the sound.

Audio board malfunction

Any smartphone requires an audio card that is responsible for amplifying specific frequencies. Failure of this part results in no sound or minimal volume. But, partial loss of sound may also occur. To correct the problem, you will need the help of a service center, where specialists will carry out diagnostics and repairs.

Cable wear

If the malfunction is due to wear on the cable, then you will notice various interference when listening to music or having a telephone conversation. There is also a lack of any sound notification for an incoming call. Typically, this problem is relevant for old phones that have been in use for several years. To correct the situation, you will need to replace the part.

Mechanical damage

Mechanical damage is considered the main cause of many problems. Users often drop their devices, and any fall can negatively affect the operation of the smartphone. For example, the cables could break, the connector could be damaged, or the contacts could crack. And moisture ingress leads to one hundred percent malfunctions.

How to recover deleted messages in Honor and Huawei phone

Speaker malfunction

Often a faulty speaker is found on new phones. This is due to a manufacturing defect, so you can apply for warranty coverage to the store where you purchased the smartphone. But another common cause of a faulty speaker is careless handling of the device; for example, an unfortunate fall can easily damage a fragile part.

In some situations, the problem may be hidden in the speaker mesh being dirty. Then the solution is enough to clean it using special products. This is the main reason why the ear speaker does not work on Huawei and Honor. When cleaning, you can use cotton swabs with alcohol or hydrogen peroxide, or a needle.

If you have any questions or complaints, please let us know

Ask a Question

Audio jack problems

If there are problems with the connector, the headphones will not work. In this case, the system will see the connected headset and even send a signal, but damaged contacts will not transmit sound. One of the reasons for a faulty connector is dirt; it can often become clogged. If cleaning does not help, then you will have to change the component.

Software level failures

A system failure is rarely the cause of a speaker not working. Software errors negatively affect the functionality of the device; some can completely break the operation of certain components in the hardware, while others can only cause the smartphone to slow down and freeze. Typically, a system failure occurs due to the use of several identical applications at once to improve sound quality. Remove unnecessary programs and use only one. Don't forget to reboot your Android after the removal operation.

Granting rights to third party applications

The reason given is not always noted. Let’s say that during a phone call you can hear the interlocutor normally, but when talking through a messenger (for example, Vastap or Viber), there is interference or poor hearing.

This is due to incorrectly configured parameters. Go to the messenger settings and open the tab where permissions are granted to the program. Enable all items so that the application has access to all the necessary options on the smartphone.

How to hide your phone number on Huawei and Honor: methods, settings

Resetting profile applications

If the problem persists, then perform a factory reset. To do this, go to the settings and find the “Backup and reset” section, then click on “Reset” and confirm the procedure. The operation will delete all information from the phone, after a reboot you will get a clean system that will have to be configured again.

To reset specific applications, go to Settings in the Programs section. Find the utility you need. For example, “Phone” and go to the “Memory” tab and click “Reset”.

Incorrect flashing

On the Internet, on various resources, you can find any firmware versions, including official and pirated ones, distinguished by interesting designs and other personalizations. If the user installs non-official software, he runs the risk of encountering some problems. For example, you could install firmware that lacks the drivers needed for the speakers to work. To correct the situation, you need to reflash the system. Just install the official version downloaded from the developer's main website or from the w3bsit3-dns.com forum.

Remove the problematic application

You can also boot your Honor phone into Safe Mode. In this mode, no third-party application works.

Do the following:

1. Turn off your Honor;
2. Press and hold two keys at the same time – volume up and power button;
3. When the Honor logo appears, release the keys;
4. A menu will open. Using the “Volume Up” key, select “Safe Mode” and press the power button;
5. The phone will boot into safe mode. Check if there is sound.

If there is sound, then the reason why the sound is missing is one of the third-party applications that you installed on your phone. It remains a step-by-step method of disabling (uninstalling) such applications (start with the most recent ones installed by you), identifying the culprit and removing it from the device.

To exit safe mode, restart your phone as usual.

More details:

Why is there no Play Market on Honor and what should I do?

How to make live wallpaper on Honor phone

.

Buying ringtones from the iTunes Store

1. Open the iTunes Store app.
2. Click the "More" button.
3. Click Sounds.
4. Find the ringtone you want and click the price to make a purchase.
5. Select the option to set the ringtone automatically. or click "Done" if you want to decide later.

6. You may be required to enter your Apple ID password to complete your purchase.

Availability and store features may vary by country or region. Learn more about what's available in your country or region.

Clean your phone speakers

Speakers get dirty and clogged with dirt or dust, so a little cleaning can make the sound clearer. Before cleaning the speaker, turn off your smartphone and remove the battery. To effectively blow out the speaker, use a can of compressed air.

After blowing, you will see some lint and other similar debris. You can vent the speaker without having to open the case. However, do not attempt to clean the speaker unless you are familiar with the smartphone hardware or your device is under warranty.