How to turn off vibration on the Honor 9 keyboard. How to turn on vibration on Android phones

Turn off vibration during incoming calls and screen touches

When a call comes to the phone, the smartphone (depending on the set mode) plays a melody, and can also give a vibration signal when connecting to a subscriber. You can disable it in the settings. Depending on the model and version of Android, this menu item may be located in different places.

Let's look at how to remove vibration on a Lenovo phone. To do this, follow a couple of simple steps:

In most Lenovo phones with Android 4.2.1 and higher, vibration is turned off using the method described above.

On Samsung phones this is done in a similar way, however on some versions of Android these settings are located in different places. If you are the owner of a smartphone from this South Korean brand, and want to remove vibration during connection, use the following instructions:

By following these simple steps, your smartphone will never vibrate again when connecting to a caller or when touching the screen.

How does vibration work on your phone?

A mobile phone consists of a main board on which all its modules are located. If you were able to see the computer motherboard, then it will be easy for you to understand what the board on the phone is. If we disassemble any modern mobile phone, we will see a small electric motor.

Vibration mechanism in the phone

Which acts as vibration on the phone. It has a small asymmetrical crescent at the end of its axis. Which, at high rotation speeds, causes vibration of the entire phone body.

Asymmetrical crescent in the phone

We will be lucky if the vibration does not work and it turns out that the problem was in the software part of the phone. And the engine itself did not burn out or fail inside the housing.

How the vibration mechanism works in a phone

In this case, you will need to take the mobile phone to a service center to replace the element. Or buy a new one, if you currently have such funds. Let's hope that using the instructions below you will be able to fix the problem and not have to send the device in for repair. We’ll tell you what exactly to do next.

Disable vibration in typing mode

Every day a person types several thousand characters of text on the keyboard of his smartphone. Some users find the constant vibration feedback very annoying. In addition, regular operation of the motor leads to accelerated battery discharge. To disable vibration feedback on phones from Lenovo, you need to:

On most Lenovo models with the Android 4.x.x operating system, this instruction allows you to disable key vibration.

For Samsung phones that support vibration when you press the keyboard, the instructions are almost identical:

Go to the “Settings” of your mobile phone.
Click Options (or My Device).
In the menu, go to “Language and input”.
Select "Samsung Keyboard".
Turn off vibration in settings.

These steps will remove vibration feedback when typing. On the same page you can make other keyboard settings; in particular, you can turn off key sounds.

If for some reason you were unable to disable the vibration response of an incoming call, you can try to do this using a third-party program. One of them is called Customize Vibrancy.

The main purpose of this program is to set a specific vibration “melody” for each action, for example, ending a call, or a new SMS message. But you can also turn off vibration completely. To do this you need:

In some cases, the source of vibration may be a third-party application, for example, Odnoklassniki or VKontakte. When you receive a message or any other notification, your phone may automatically vibrate despite the settings. To disable it, you should do the following in this application.

In Android operating systems, the user receives feedback from the gadget using vibration feedback. But what to do if you need to remove excess noise? The owner of the device can easily adjust or disable vibration for actions such as notifications, SMS, calls and typing.

How to disable vibration feedback on Android?

When you press the touch buttons at the bottom of the screen, the device responds with vibration. In silence it can be heard very well, which annoys many users. You can remove the vibration response by following a number of instructions:

Go to system settings.
In the "Device" section, select "Sound".
Scrolling down to the bottom, you will see the “Vibrate on touch” option.
Uncheck the box and enjoy the silence.

Video: disabling vibration response using the example of an Asus phone

A way to remove vibration feedback on the GBoard keyboard on Honor

To disable vibration feedback on an Honor keyboard in the case of a GBoard keyboard, do the following:

Go to your device's settings;
At the bottom, select “System”;
Tap on the “Language and input” option;
In the list of keyboards that open, select the GBoard keyboard;
Then click on “Settings”;
Scroll to the bottom of the keyboard settings page, where you will see “Vibration response to key presses”;
Switch the corresponding slider to the “Off” position. Turn off vibration on your Gboard keyboard

How to remove/enable keyboard vibration

Go to the settings menu and in the “Personal Data” section, click on the “Language and Input” item.

In the “Keyboard and input mode” section, opposite the keyboard we are using, click on the settings icon.

At the very bottom of the list we see the item “Sound and vibration”, go to it.

Uncheck or check the box next to “Vibrate when pressed.”

If desired, you can reduce or increase the strength of vibration by going to the “Vibration Intensity” window. Settings are changed by dragging the slider.

Removing vibration from other third-party keyboards

Today, many people stop using the standard keyboard from Huawei, preferring to install third-party applications that support more functions. Such solutions include SwiftKey, Swype, etc. In fact, the procedure for disabling an unnecessary option will not be much different. In the settings of each keyboard there is a section with the sound of keystrokes. Go to the settings, find the “System” - “Language and Input” - “Virtual Keyboard” tab. In the list, click on the option you are using and, among the proposed functions, deactivate the unnecessary one.

As you can see, the shutdown procedure is not much different and is carried out in the smartphone settings.

How to set or turn off vibration for notifications and SMS

Setting up vibration for SMS and notifications is slightly different from the previous ones.

Let's go to incoming messages.

In the upper right corner, open the hidden menu and click on “Options”.

Uncheck or check the box next to “Vibration notification”.

Some applications have individual notification settings. For example, VKontakte.

Launch the application, open the menu in the upper left corner and look for the “Settings” item.

Next, click “Notifications”.

Finally, we customize the application for ourselves. By disabling the “Vibration” item, we will thereby get rid of it for notifications from this application.

What to do if vibration disappears?

If vibration is turned on, but it does not work at all or intermittently, this means that there has been some disturbance in the operation of the vibration alert. This problem can have several causes:

installed programs conflict with the vibration alert;

The battery is low and the device is operating in energy saving mode;

if the smartphone is completely new, then perhaps it has a manufacturing defect;

accumulation of dust between the vibration motor and the internal board, loss of contact between them;

mechanical impact or moisture entering the device;

software errors.

What to do?

Make sure vibration is actually turned on in settings.

Charge your device.

Reboot your cell phone and check if this feature works again.

If you have the opportunity and experience, disassemble and clean the device from the inside.

Update the firmware, do not forget to save all data to another media or device before doing this.

To avoid this problem, treat your device with care:

avoid mechanical damage;

avoid moisture: an accidentally spilled glass of water can lead to serious damage and long, expensive repairs;

buy a special case for your phone; there are many accessories that will not only protect your device from dust and dirt, but also decorate it.

What to do if vibration doesn't work

Has your touch screen stopped vibrating? If the function stops working, the first thing to do is restart your phone. There was probably a software glitch that caused the vibration response to not work. The device may also be to blame if it falls. Often mechanical damage becomes the main reason for a non-functional function. If you recently dropped your phone, the module probably broke during the fall.

First of all, check your device for system errors. If rebooting or resetting to factory settings does not bring the desired result, contact a service center. Specialists will carry out diagnostics and repair work to replace the broken module.

Vibration Control Applications

Customize Vibrancy

This application will allow you to select a vibration "melody" for various actions: "Imperial march" for connecting to the Internet and "La Cucaracha" for incoming calls, for example. How to set this up?

Download the Customize Vibrancy app on Google Play and open it.

We see on the screen a list of actions and vibration melodies for them. The application works for picking up the handset, for ending a call, for the interval of every minute of a call, for incoming SMS, when the Internet becomes unavailable, when the Internet becomes available via a Wi-Fi connection, when the Internet becomes available via 3G. You can feel the selected vibration by clicking on the action.

To change the “melody”, press and hold the desired action for a few seconds. A list of vibrations appears. You can select and listen to each one at the same time by clicking on it.

You can also record your own “melody” by clicking on the “+” in the upper right corner above the list. There are two recording options available: Morse code or touch recording.

For example, we select a recording by pressing it, and by touching it we play the melody.

To stop recording, click on the square in the bottom center.

We save the vibration with a standard or invented name.

Now there is a new vibration on the list.

Video: Controlling Vibration with Customize Vibrancy

Checking vibration in the engineering (service) menu

In the service menu you can test all the settings of your Android phone. To enter the service menu, you need to go to calls and dial a special code instead of a friend’s phone. Each phone model has its own combination:

Samsung - *#*#4636#*#* or *#*#8255#*#*
HTC - *#*#3424#*#* or *#*#4636#*#* or *#*#8255#*#*
Sony — *#*#7378423#*#*
Huawei - *#*#2846579#*#* or *#*#2846579159#*#*
MTK - *#*#54298#*#* or *#*#3646633#*#*
Fly, Philips, Alcatel — *#*#3646633#*#*

After typing the key combination, the phone will automatically switch to the service menu. If this does not happen, try pressing the call key.

In the menu that appears, click on Service Tests.
Next, among all the settings, select Vibrator.
Press the button on the side to feel 3 vibration signals.

Vibration in the Android operating system can be easily disabled, enabled or configured by following the instructions above. This can be done using standard methods or using additional software. Each user can customize the device based on their tastes or situation.

On an old smartphone, you may encounter the fact that almost all actions in the system are confirmed by a short vibration. Some users like this vibration, but more often than not, it is annoying.

If you also do not like this constant vibration, then you can turn it off. In this article we will talk about how to remove vibration on the Android keyboard, as well as when you press system buttons, such as the Home or Back buttons.

So, if you are annoyed by vibration when using the Android keyboard and want to remove it, then you need to open Android Settings and go to the settings section called “Language and input”. This section contains all system settings that relate to entering text from the keyboard. In order to remove vibration on the Android keyboard, here you need to open the “Virtual Keyboard” subsection.

After this, a list of keyboards installed on the system will open. Here you need to select the keyboard you use for typing. Please note that Google Voice Typing is not a keyboard, but a dictation typing technology. In our case, we select “Google Keyboard”. Your keyboard may have a different name. For example, it could be “Samsung Keyboard” or “LG Keyboard”.

Once you have selected the keyboard you want, you need to go to its settings. To do this, find the “Settings” section and open it.

You can turn off vibration in the keyboard settings. To do this, you need to disable the “Vibrate when pressing keys” feature. It should be noted that in your settings this function may be called slightly differently. For example, " " or something like that.

Here you can also enable or disable the sound when pressing keys and other keyboard settings.

A way to solve the problem if the vibration sensor on an iPhone does not work

Most of the setup issues or problems in Apple phone are due to app glitches. This often happens in the device's RAM. A simple reboot will help avoid errors in the phone's operation. If this does not solve the problem, try resetting the settings. At the same time, files on the iPhone will also be erased from the device’s memory unless you create a backup copy on iCloud.

What needs to be done for this if vibration does not work:

Open iPhone settings; Open iPhone settings
Select “Apple ID” and click the “Sign Out” button at the bottom of the next window; Click the "Logout" button below
Enter your account password to confirm; Enter your Apple ID password
Decide what to do with contact data from Safari, after which the data will be exchanged with the cloud;
You need to go back to your phone settings and select “Basic”; Select "Basic"
Find the “Reset” item at the bottom;
Select the line called “Erase content and settings” on the next window;
Confirm deleting data from your phone.

The Apple logo and a progress bar for deleting files from your device will appear on the screen. This process will not take much time. Once the factory reset is complete, you can return to the system and log into your account. Then check the vibration now by adjusting accordingly or turning on the Silent mode.

This may be useful: There is water on the phone screen, what should I do?

How to remove vibration on Android system buttons

The steps described above remove vibration when using the Android keyboard, but you may still experience vibration when you press the Android system buttons. For example, when you press the “Home” or “Back” button.

If you want to remove these vibrations, then you need to open Android Settings, go to the “Sound” subsection and open “Other sounds”.

In this section you can remove vibration when you press the Android system buttons. For this you need.

In addition to vibration, here you can remove sounds that appear when dialing a number, locking the screen or low battery.

Vibration (vibration response) is one of the ways of interaction between the user and a mobile device, thanks to which you can perceive responses from the smartphone without playing sounds. For the most part, this function is very useful, but at various events, studies or during work hours it can be very distracting to strangers. How to remove vibration on Xiaomi, thereby making the smartphone completely silent?

The most common events that lead to smartphone vibration:

vibration when pressing touch keys;

vibration when pressing the virtual keyboard;

Vibrate alert.

Let's talk in more detail about each of them.

It is very easy to disable the vibration response of touch keys. To do this, you just need to go to the settings of your smartphone and in the “Personalization” subsection, select “Sound & vibration”.

In the window that opens, click on “Vibration response” and select “Disabled” from the available options.

After this, pressing the touch keys you will not feel any feedback. The only place where vibration will remain in this case is on the fingerprint scanner, which can be installed either as a separate element or as a whole with the central “Home” key (for example, in a smartphone).

The second most important vibration problem is the constant feedback when typing. This can be very distracting for both strangers and the user himself.

To fix this problem, you need to go to “Settings” and find the “Advanced” item.

Different keyboards have vibration settings in completely different places.

For example, to disable it on the Gboard keyboard, you need to go to its “Settings” section and change the position of the “Vibrate when pressing keys” switch.

SwiftKey

As for the SwiftKey keyboard, here you will have to go to the “Input” section and deactivate the switch in the “Sound and Vibration” subsection.

Why doesn't my Xiaomi phone vibrate?

Often, under different circumstances, the settings in the smartphone change automatically. As a result, various changes occur in the system, including the absence of vibration. If you manage to fix the function using this method, be sure to check your phone for viruses. When they are present, various changes often occur in the system.

To check the settings in Xiaomi:

Lower the system curtain from top to bottom; Open Settings on Xiaomi
Click on the gear icon at the top;
Find the item “Sound and vibration” and click; Click on the "Sounds and Vibration" button
Lower the list of settings a little and find the items that are responsible for vibration in your smartphone. They need to be activated; Activate vibration settings on your phone
Pay attention to the “Vibration response” item; this parameter is responsible for the intensity of vibration. Make sure it is set to Medium or higher; Select "Vibration Feedback"
Also activate the item that controls vibration in Silent mode. So that when it is activated, you can understand that you are being called.

When the settings are applied, try to check if vibration is currently working on your phone. It's also worth trying different vibration response intensity settings. Change settings and test vibration on your mobile device.

How to turn off vibration for an incoming call?

If you need to turn off the vibration of an incoming call, then, as in the first case, go to the “Sound & vibration” item and there set the “Vibration on call” switch to the inactive position.

All this will allow you to make working with your smartphone less noticeable to others.

After purchasing a new gadget on the Android platform, almost all functions are enabled in the default settings, including vibration feedback. A similar situation occurs after resetting the gadget to factory settings.

Some users are annoyed when the keys respond to the beat with a slight tremor when typing. Therefore, many people ask a completely logical question: “How can I remove keyboard vibration on Android?” A good half of the owners of smartphones and tablets are accustomed to screen shaking and simply put up with it, while the rest are poring over the menu in search of the “Off” button.

So, let's try to figure out how to remove keyboard vibration on Android and do it without using third-party programs or any specific utilities.

How to turn off vibration on the keyboard on Android

As you know, (phone manufacturer Honor) does not use its own virtual keyboard on its phones. For this reason, you will not be able to turn off vibration in your phone's default settings. To disable vibration feedback, you will need to go to the settings of the “SwiftKey” keyboard, which is the main keyboard of Honor gadgets.

SwiftKey is the default keyboard for your Honor

But there is one catch. On a regular Android phone, the SwiftKey keyboard is available in the application drawer. Typically, you can go to the App Drawer, open SwiftKey, and turn off key vibration. However, the listed method does not apply in any way to Chinese Honor phones, in which the settings are made differently. But before moving on to the description of the Honor disabling algorithm, let me tell you a little about SwiftKey.

This is useful to know: how to clear the cache on Honor.

Procedure

Go to settings, open the “Personal” menu item, then select the “Language and input” section, and in it you need to find the “Default” subcategory. The latter should have your keyboard installed. Before you remove keyboard vibration on Android, you also need to know that there must be a brand name like Samsung, Sony, NTS or some other brand, but always with the Keyboard prefix.

In the case of ultra-budget Chinese models, you can see a simple set of words. This menu item is usually located next to the Google Voice settings, so it’s quite easy to find.

Turn off vibration

Next, click on the gear, after which we click on the “Advanced” tab, where the items we need are located. Uncheck the vibration boxes and you're done. Before you remove keyboard vibration on Android 5.1, you should also know that there may not be a “Default” subcategory, so you need to go straight to the next points.

If your device is very exotic, then the shutdown process will take a lot of time. The main thing here is to find the menu item in the settings that is responsible for input tools, and then look for beacons where you need to remove the checkmarks from vibration. Some manufacturers are quite scrupulous about instructions, so it would be a good idea to review them carefully. It is quite possible that this procedure is described in detail in the manual for the device.