Rear Panel Removal Materials
Disassemble the Honor mobile device, of course, at home. With all this, it is not necessary to have any special tools.
To independently open the back cover of your Honor phone, the following devices will be useful:
- a small screwdriver for unscrewing the screws on the device body;
- a special suction cup, where at the end there is a ring, with the use of which you can lift the cover of the phone;
- plastic card, if a special mediator is not available when repairing a mobile device.
When the necessary tools are found, then proceed to the specific disassembly of the Honor mobile device.
Features of analysis of Asus x53s
The manufacturer Asus has released a huge number of models, but they all need periodic cleaning. Above we have already described several options for how to disassemble a laptop. Asus X53s has a similar structure to other models, so the beginning of its disassembly is similar to them.
You should start by removing the battery, then unscrew the screws on the back of the device. After this, you can remove the cover to gain access to the hard drive and RAM. These modules should be removed, and the wires from the Wi-Fi module must also be disconnected.
Now the laptop turns over and the keyboard is removed. To do this, you need to press the four clips at the top.
The next step is to disconnect the ribbon cable from the keyboard and other sensors. All that remains is to unscrew the three screws located under the keyboard, and you can remove the top cover. A plastic card or any thin object is suitable for this purpose. Now you have access to the motherboard, which can be easily removed.
How to open the back cover of an Honor smartphone
Some modern mobile devices in the current situation are created with a unibody body. This is usually done with the intention of maximizing the protection of the device parts from external penetration of water, dust, and dirt. In addition, there is less chance of destroying the body, which, thanks to its own integrity, becomes stronger and more reliable.
However, for some reason the user needs to disassemble the phone by opening the back cover. For the most part, this is carried out with the intention of checking parts, as well as changing devices, for example, a battery. But many users begin to twirl the Honor mobile device in search of some way to open the back cover, but to no avail. However, even on your own you can successfully disassemble your Honor smartphone without causing any trouble.
Preparing to open the lid
Before you begin any mechanical process on your Honor mobile device, you must turn off the power. This is done to prevent accidental button presses, as well as for safer shutdown.
The back panel of the Honor smartphone is fixed with hot-melt adhesive specially designed for this purpose. Therefore, before directly disassembling the phone, it is highly advisable to use a hairdryer, warming up the entire case with it for maximum heating. In this case, the user should monitor the process without being distracted by external stimuli. It is important to prevent overheating, as this can damage the elements of the mobile device.
It is worth considering that hot melt glue will be needed after the preparatory stage. After all the manipulations with the mobile device, you will have to fasten the back cover again; to do this, you will need to generously coat the panel with hot glue, and then press the cover tightly for a few seconds, applying some effort.
How to disassemble Huawei Mediapad tablets
After removing the back of the case, the “inner world” of the device opens to you. Here is the battery, slots, chips, microcircuits, etc.
To disassemble and replace parts, it is important to carefully and sequentially remove the components and place them not on the table, but in a small container. This way you definitely won’t lose anything while working. Using the example of several popular models, we will consider a complete disassembly.
MediaPad M3 Lite 10
The algorithm of actions is as follows:
- separate the cover from the device using the specified method;
- use screwdrivers to remove the screws;
- take tweezers and free the parts from the staples;
- a screwdriver will help you remove or replace any part;
- First, to avoid short circuit, disconnect the battery from the motherboard;
- then remove the SIM card slot;
- and remove the parts in order.
AGS l09
This Chinese model is similar to the media pad, so the manual is the same:
- remove the back cover using a suction cup;
- get rid of screws and staples;
- disconnect the battery;
- remove SIM slots;
- Using screwdrivers and tweezers, remove the remaining parts.
Mediapad 10 Link
It is important to emphasize here that after opening the back with sharp tools, scratches and chips remain on the coating, so do not try to open it without a suction cup. There are no special instructions for owners of Mediapad 10 Link; everything is done in the classic way:
- disconnect the battery from the board;
- remove the SIM card slots;
- use a screwdriver to remove all fasteners;
- remove the fingerprint;
- remove the speaker;
- remove the remaining components.
If any parts inside are clogged, wipe them only with a lint-free cloth. It is recommended to place all components not on the table, but in a special container so that nothing gets lost.
Anatoly Bogdanov (Articles written: 81)
Site curator and expert editor.
Monitors the work of each employee. Reviews each article before release. In addition, she is an expert editor and responds to user comments. View all posts by this author →
Article rating:
Loading…
How to open the back cover on Huawei tablets - disassembly instructions Link to main publication
Opening the back cover of a smartphone
The algorithm for disassembling the solid body of an Honor mobile device will look like this:
- Turn off the power of the smartphone by pressing the special key and wait until the device turns off completely.
- Pull out the card slot.
- Warm up the body of the device with a hairdryer.
- Attach the suction cup with the ring to the back cover of the phone, then use a mediator (if you don’t have one, use a thin plastic card) to separate the back panel from the smartphone body.
- Completely remove the cover, which is held on with special glue.
READ How to Connect an Additional Hard Drive to Your Computer
After carrying out all the necessary procedures, you will need to replace the adhesive on the back cover of the device for maximum secure fastening, and then put the panel in its place, making some effort to secure it.
using a suction cup
The second option requires a special suction cup and a card. The procedure in question is easy and involves a number of steps:
- Use a hairdryer and warm up the back panel.
- Press the suction cup firmly onto the panel.
- Gently pull it towards you.
- Insert a thin plastic object into the gap that appeared during the use of this tool.
- Run it along the entire seam and carefully remove the cover.
If there is a fingerprint, carefully disconnect the cable with an auxiliary tool.
plastic key
The first method involves using a small screwdriver and any card. Take the phone face down and unscrew the two small bolts at the edges near the USB input.
Then remove the SIM card slot.
Carefully insert a card or any plastic tool with a pointed, flat end.
If you have any questions or complaints. let us know
Gently run it along the seam on the body and then remove the panel.
We disassemble the Asus x550c laptop
Many users are wondering how to disassemble an Asus x550c laptop. This is due to the fact that the keyboard of this model is removed along with the top panel. Now more details.
The beginning of the process is the same as for all models of this manufacturer. After removing the hard drive and RAM cover, these parts should be removed. Next, unscrew the remaining screws from the back cover.
Now you should place the device on its edge and use a thin screwdriver to separate the top cover. This procedure should be done very carefully, since the latches are very thin. Do not pull on the cover until the latches are removed all around.
After removing the top cover, you should disconnect the cable that connects the device to the keyboard. The further disassembly procedure for this model does not differ from those described earlier.
The company's smartphones with and without a removable cover - list
Smartphones that allow you to remove the cover:
- 7A PRO.
- P20 PRO.
- P30 Lite.
- P8 Lite 2021.
- Y9 2021.
All other modern devices do not provide this function. These include:
- 8 Lite.
- P Smart Z.
- 8 C.
- Y6 Prime 2021.
- 6C Pro.
- 9/9 Lite.
- P30 Pro.
- P Smart.
- Nova 3.
- P9 eva l19.
- 6a.
- 7a.
- View 20.
- Y6 2021.
- 10/10 Lite.
How to open a card slot in a phone
Developers of phones, or rather smartphones, never cease to amaze with meaningless innovations.
However, you have the right to disagree with my opinion, but I, for example, absolutely did not like, for example, the hybrid slot.
This code allows you to insert either a card or a micro SD flash drive into it. Maybe earlier, when there were no two slots at all, such a decision would have been received with a bang by everyone.
Only today no one likes to constantly change cards, but many have to, especially those who call to foreign countries.
The second “misunderstanding” is the key slot. Not only is it hard to find, it also requires a key or something similar.
I don’t know why they didn’t like the traditional slot on a regular latch - I pressed it once, the slot opened, pressed it a second time, the slot closed tightly.
If your smartphone can only install one card, then there is a good way to install two - more details here.
Simple and convenient, but if this happens, I’ll show you how to open the slot on Samsung, xiaomi redmi 3, iPhone, Meizu, ASUS, Huawei, Lenovo, and so on.
How to properly open a card slot with a needle
If you repaired socks or trousers, you will definitely have a needle in the house.
Just use the non-pointed end that you will insert into the hole and press, for example, on the edge of the table.
I wouldn't advise you to try this with your hand. If you use sharp objects, like needles, then use some kind of hard surface to press.
RECOMMENDATION: do not push the needle into the phone tray with your hands - this is dangerous, because you will have to press on the sharp end.
Of course, there are many other alternatives, including toothpicks, pins, or just about any other pointy thing around you.
READ How to Take a Screenshot on a Samsung Phone
Asus laptop screen analysis
The question of how to disassemble an Asus laptop also arises in a situation where it is necessary to replace the matrix on the screen. The reason for this could be anything. In most cases, this need arises when cracks appear on the screen.
Here you should follow a number of standard rules, namely that it is necessary to de-energize the device. Extra care should be taken when removing a damaged die.
Now you should begin disassembling the device according to the rules described above. It should be disassembled before removing the motherboard. Now we should move on to analyzing the screen. Quite often the mounting screws are hidden under the rubber shock absorber. It is attached to a sticky base, which is removed with a knife.
After unscrewing all the screws, carefully insert a knife or thin screwdriver into the gap between the two halves of the screen. By separating them, you will gain access to the matrix, which is bolted on. Having unscrewed them, disassembly can be considered complete. Study all the intricacies described in the article, and the question of how to disassemble an Asus laptop will become irrelevant.
How to properly open a card slot with a key
For those in the know, this may be obvious, but there are many people who may miss these pinholes as they are not very well integrated into the design.
Locate the small hole on the device body.
Find the card insertion tool inside your phone's box. If you lose it, you can use something like a paperclip.
insert the tool into the hole, press firmly and the slot should pop out.
remove the card from the tray or carefully place the card or flash drive in it.
insert the tray back into the phone and press it to close.
NOTE: You can use a paper clip, but be careful and never use a sharp object like a pin. This will damage the tray. Also, do not use wooden sticks - they may get stuck in the hole.
Disassembly procedure for Asus K53S
Next, let's look at how to disassemble the Asus k53s laptop. First of all, you need to de-energize the device by disconnecting it from the network and removing the battery. Now you need to unscrew three screws from the frame, which is located on the opposite side of the battery. This procedure will allow you to remove it and gain access to the RAM and hard drive.
The next step is to remove the Wi-Fi card, which is secured with one screw. You have to be very careful here, since there are two wires attached to this module, to remove which you need to unscrew the clasp.
All that remains is to remove the RAM and the hard drive, which is secured with four screws. Next begins the procedure of unscrewing a large number of screws. Please note that the screws located under the battery are shorter than the others.
After they are all unscrewed, many novice craftsmen are faced with the question of how to disassemble a laptop? The Asus k53s has screws under the keyboard that secure the drive reader. To remove the keyboard, use a thin object to pick it up at the edges. This will reveal six screws and two connectors that must be carefully disconnected.
Now we remove the housing of the CD reader. After removing it, you will have access to three more screws, which should also be unscrewed.
That's it, now you can separate the top cover, for which you just need to pick it up by the edge. After completing all the procedures, access to the motherboard will open, to remove which you need to unscrew several screws. If you follow the sequence of the listed operations, then the question of how to disassemble an asus laptop will disappear by itself. The user can easily do all this without spoiling or breaking anything.
The card slot does not open - what to do then?
What should you do if the tray gets stubborn and won’t open? First of all, try to press harder - often the issue is resolved.
If this does not help, then first you need to put a key or other object into the hole, which is not subject to discussion.
Next, try to hook the slot with something - you can take a paperclip, bend it a little and try to pull it like a crochet hook.
Some people try to glue something to the tray with superglue, but it is usually not strong enough - it comes off.
Just do everything carefully, otherwise you can pierce some devices right through with a needle (you’ll even see a point of light). Therefore, if you use a pin, it is better to break off the sharp tip (bite off sharper).
It is possible that the card slot does not open because it is broken, for example, the contact is bent and caught - if you pull, it can break off.
Also, the slot may not open due to the fact that the SIM card falls out of the groove and clings to the housing connector.
Then you can try using a strip of foil or a blade and try to pull it out.
Of course, if the slot does not open because the SIM card is crooked, then it is better to give it to a specialist right away than to break it and only then send it for repair.
Some devices will take time to disassemble even for a professional - so be careful, otherwise the consequences of inexperienced intervention may result in expensive repairs.
I also suggest looking at the instructions on how and how to open card slots in phones. Good luck.
Sources:
https://mobi-insider.com/kak-otkryt-zadnyuyu-kryshku-telefona-honor-ili-huawei.html https://vsesam.org/kak-otkryt-slot-dlya-sim-karty-v-telefonax -android/
